The resin flooring installation process

The resin flooring installation process

While every site or location will have its own needs or quirks that need to be planned for, most resin flooring installations will follow a similar timeline – as explored below.

1.     Site assessment and project planning

This early stage sets the tone for everything that follows, so it should not be rushed.

On-site inspection: A contractor should visit your facility, examine the existing slab or subfloor, check for visible defects, and understand usage. This should include foot traffic, forklifts, or other wheeled equipment, chemical or water exposure, etc.

Moisture/vapour testing: Without knowing concrete moisture levels and accounting for this, applying resin can lead to future issues, like delamination or blistering.

Crack mapping and repair plans: Contractors should identify structural joints, cracks, or weak zones and address them.

System specification: Considering your preferences, they should then decide whether epoxy, polyurethane, MMA, or hybrid resin is best suited. Make sure the contractor justifies their choice and doesn’t just pick the cheapest option.

Scheduling and downtime planning: To finish, the contractor should present a timeline for installation, aligning as best they can to minimise disruption to operations where possible.

If a prospective resin flooring installer skips site visits and offers a price sight-unseen or misses steps without an explanation, treat it as a red flag.

2.     Surface preparation

Arguably, the most critical stage – most floor failures trace back to improper surface prep. Methods of surface preparation can include:

Mechanical profiling: Providers may use a variety of methods, including diamond grinding, shot blasting, or scarification, to remove weak surface layers and produce a keyed profile.

Cleansing and degreasing: To prevent contamination, resin flooring installers should remove oils, grease, and any residual coatings. Failure to do so can affect adhesion.

Repairing defects: Filling spalls, voids, or cracks using compatible repair mortars or fillers ensures a smooth, seamless finish that lasts.

Final vacuum and dust control: Immediately before resin applications, commercial flooring contractors should ensure there is no dust, debris, or contaminants left on the surface that can destroy adhesion.

3.     Priming or sealing the substrate

The first resin layer, often called a primer or seal coat, is not optional and should, therefore, never be skipped.

Priming or sealing brings many benefits, as it:

• Seals the substrate and reduces porosity
• Improves bond strength to subsequent coats
• Allows for a moisture-mitigation membrane or primer to be included in cases where moisture is present in the slab

Skipping, under-applying, or not leaving the primer to properly dry before applying another coat are common weak links in failed installations.

4.     Base/build layer application

At this stage, the structural body of the resin system is applied. To ensure durability, attention to detail should be exercised by your chosen installer while mixing and applying:

Mixing – Each resin component must be handled with the correct ratio, temperature, and mixing speed.

Applying – Most projects include the use of a notched squeegee or trowel, then back-roll to level and remove surface irregularities.

5.     Optional broadcast/aggregate layer

To increase thickness, performance, or slip resistance, industrial resin flooring contractors can add aggregates. Doing so in the wrong order can negate the benefits and even lead to resin failure.

Generally, quartz, grit, or aggregates are added to the still-wet resin. Then, once cured, excess aggregate is removed before subsequent layers are added.

This step is common in high-wear zones, heavy machinery areas, or chemical environments, but it isn’t necessary for all projects.

6.     Intermediate/secondary coats

Depending on the system design, one or more additional resin coats are applied. These extra layers fill and encapsulate any broadcasted particles, level out the surface, and contribute to the total thickness.

The same application method is used under controlled temperatures and humidity, before being properly cured.

7.     Topcoat or final seal

The final coat is your protective layer – it locks in everything beneath and gives the floor its final finish, be that matte or glossy.

Selected for abrasion, UV, chemical, and slip-resistance, they’re applied with care to avoid roller marks or bubbles.

This coat is critical to long-term performance and is often where specification is most visible.

8.     Curing, inspection, and quality assurance

Once the application ends, the floor must be allowed to cure under strictly controlled conditions. This includes keeping the room at a set temperature, humidity percentage, and ventilation amount.

Likewise, as premature traffic or loading can ruin the system, the floor will need to be left completely alone and unfurnished.

Finally, your chosen commercial flooring installer should conduct final inspections, including adhesion, gloss, and appearance checks, and walk-throughs with you before they can formally sign it off and give you a full handover.

9.     Handover and ongoing maintenance

At completion, your contractor should hand over:

• A full system data sheet and specification documentation
• Cleaning and maintenance guidance
• A maintenance schedule
• Your warranty information
• Recommended inspection intervals

This will help ensure your commercial resin flooring lasts for as long as possible, extending the lifetime of your project.

What can go wrong – common failure points.

When you choose an industrial flooring contractor, you put a lot of faith in them to deliver the outcome you’ve requested.

For this reason, if the flooring does fail because of poor project management or technique, it’s most likely to be caused by one of the following reasons:

• Insufficient or improper surface prep
• Moisture problems in the slab
• Incorrect mixing ratios, insufficient mixing, or wrong pot life
• Contamination from dust, oil, or debris during application
• Rushing curing or re-coating timeframes
• Poor jobsite environmental control, including the room temperature and humidity levels

A trustworthy resin flooring contractor will explain how they control these risks and will be happy to talk you through quality checks and corrective measures, if they are needed.

Choose the right resin flooring installers for peace of mind.

Resin flooring installation is a multi-stage process that demands discipline, planning, and craftsmanship, and there’s no room for shortcuts.

But when executed by skilled resin flooring contractors, the payoff is a long-lasting, seamless, high-performance surface you don’t have to worry about – especially if you are willing to follow the maintenance advice.

For a floor done right the first time, contact the experts at Quest Industrial Flooring Ltd. We are based in Cheshire but provide industrial flooring to sites across the UK – so why not email sales@questltd.co.uk for a bespoke quote today?